Products | Sinoflex Chemicals Private Limited

Description:

Solvent Based Printing Ink Suitable for printing on all Types of Woven Sacks

Application:

Polypropylene Woven Sack, Polypropylene Woven Fabric

Key Product Features:

Good Printability and re solubility
High Colour Strength
Immediate adhesion on substrate
Good Nail, Scuff and Tape Resistance
High Gloss

Properties :

Ink Adhesion	5
Nail and scuff Resistance	4
Gloss	4
Water Resistance	NA
Deep Freeze Resistance	NA
Tape Resistance	5
Alkali Resistance	5

Rating Scale :

1 = Lowest , 5 = Highest

Note : All resistance properties are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate. All resistance properties / LF are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate.

Diluent: (For Speed 350 M/M)

Slow – Recommended Sinosack Thinner

Normal - Recommended Sinosack Thinner

Fast - Recommended Sinosack Thinner

Remark :

Health & Safety : Read health and safety guidelines given in MSDS before using these products. The user is responsible for all local legislation requirement and packaging conditions.

Ink Handling : Please refer to general guidelines given in MSDS for handling ink for flexible Packaging.

MSDS : Material safety data sheets are available on request. We advise to read the MSDS carefully before using the products

Description:

Pigment Based Heat Resistance Printing Ink Suitable for surface printing on Block Bottom AD Star Cement Bags.

Application:

AD* Star Woven Sacks/Block Bottom Bags

Key Product Features:

Good Printability and re solubility
High Colour Strength
For speed from 50 M/M to 220 M/M
High bond strength

Properties :

Ink Adhesion	5
Rub Resistance	4
Heat Resistance (Air Blow Temperature)	800'C
Scratch Resistance	4
Gloss	4
Deep Freeze Resistance	-
Tape Resistance	5
Water Resistance	5

Rating Scale :

1 = Lowest , 5 = Highest

Note : Heat Resistant against 800°C Hot air. no direct contact of substrate with Hot surface
All resistance properties are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate. All resistance properties / LF are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate.

Remark :

Health & Safety : Read health and safety guidelines given in MSDS before using these products. The user is responsible for all local legislation requirement and packaging conditions.

Ink Handling : Please refer to general guidelines given in MSDS for handling ink for flexible Packaging.

MSDS : Material safety data sheets are available on request. We advise to read the MSDS carefully before using the products

Description:

Corrugated Boxes Coated and Uncoated, Kraft Paper

Application:

Polypropylene Woven Sack, Polypropylene Woven Fabric

Key Product Features:

Good Printability
High Colour Strength
Rapid Drying
High Opacity
High Gloss

Properties :

Ink Adhesion	5
Nail and scuff Resistance	5
Gloss	4
Water Resistance	3
Deep Freeze Resistance	NA
Tape Resistance	NA
Alkali Resistance	NA
Heat Resistance	NA

Rating Scale :

1 = Lowest , 5 = Highest

Note : All resistance properties are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate. All resistance properties / LF are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate.

Remark :

Health & Safety : Read health and safety guidelines given in MSDS before using these products. The user is responsible for all local legislation requirement and packaging conditions.

Ink Handling : Please refer to general guidelines given in MSDS for handling ink for flexible Packaging.

MSDS : Material safety data sheets are available on request. We advise to read the MSDS carefully before using the products

Description:

Solvent Based Flexographic Printing Ink Suitable for HDPE/PP/LDPE and various types of shopping bags and food packaging substrates.

Application:

Treated PP & PE, PVC, BOPP, PET Films

Key Product Features:

Good Printability
High Colour Strength
Rapid Drying
High Opacity
High Gloss

Properties :

Ink Adhesion	5
Gloss	5
Water Resistance	2
Deep Freeze Resistance	NA
Bond Resistance	5
Alkali Resistance	NA

Rating Scale :

1 = Lowest , 5 = Highest

Note : All resistance properties are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate. All resistance properties / LF are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate.

Remark :

Health & Safety : Read health and safety guidelines given in MSDS before using these products. The user is responsible for all local legislation requirement and packaging conditions.

Ink Handling : Please refer to general guidelines given in MSDS for handling ink for flexible Packaging.

MSDS : Material safety data sheets are available on request. We advise to read the MSDS carefully before using the products

Description:

Toluene and Ketone free lamination Grade Rotogravure Ink Suitable for Reverse Printing on flexible substrates

Application:

CC PET, CT PET, LD, PP, BOPP

Key Product Features:

Toluene and Ketone Free Ink
Good Printability and re solubility
High Colour Strength
For speed from 100 M/M to 350 M/M
High bond strength

Properties :

Ink Adhesion	5
Gloss	5
Bond Strength	>100gmf/15mm
Deep Freeze Resistance	NA
Alkali Resistance	NA
Water Resistance	NA

Rating Scale :

1 = Lowest , 5 = Highest

Note : All resistance properties are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate. All resistance properties / LF are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate.

Diluent: (For Speed 350 M/M)

Normal - Ethyl Acetate – Ethanol – Methoxy Propanol – (45:45:10)

Slow – Methoxy Propanol

Remark :

Health & Safety : Read health and safety guidelines given in MSDS before using these products. The user is responsible for all local legislation requirement and packaging conditions.

Ink Handling : Please refer to general guidelines given in MSDS for handling ink for flexible Packaging.

MSDS : Material safety data sheets are available on request. We advise to read the MSDS carefully before using the products

Description:

PU Based Printing Ink Suitable for reverse printing on PET/Polyester films

Application:

Normal PET, CC PET, CT PET

Key Product Features:

Good Printability and re solubility
High Colour Strength
For speed from 100 M/M to 450 M/M
High bond strength

Properties :

Ink Adhesion	5
Gloss	5
Soap Resistance	NA
Deep Freeze Resistance	NA
Alkali Resistance	NA
Water Resistance	NA

Rating Scale :

1 = Lowest , 5 = Highest

Note : All resistance properties are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate. All resistance properties / LF are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate.

Diluent: (For Speed 350 M/M)

Slow - MIBK

Normal – TOL/EA – 1:1

Fast - MEK

Remark :

Health & Safety : Read health and safety guidelines given in MSDS before using these products. The user is responsible for all local legislation requirement and packaging conditions.

Ink Handling : Please refer to general guidelines given in MSDS for handling ink for flexible Packaging.

MSDS : Material safety data sheets are available on request. We advise to read the MSDS carefully before using the products

Description:

Vinyl Based Printing Ink Suitable for reverse printing on PET/Polyester films

Application:

Normal PET, CC PET, CT PET

Key Product Features:

Good Printability and re solubility
High Colour Strength
For speed from 100 M/M to 350 M/M
High bond strength

Properties :

Ink Adhesion	5
Gloss	5
Soap Resistance	NA
Alkali Resistance	NA
Water Resistance	NA

Rating Scale :

1 = Lowest , 5 = Highest

Note : All resistance properties are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate. All resistance properties / LF are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate.

Diluent: (For Speed 350 M/M)

Slow - MIBK

Normal – TOL/EA – 1:1

Fast – MEK

Remark :

Health & Safety : Read health and safety guidelines given in MSDS before using these products. The user is responsible for all local legislation requirement and packaging conditions.

Ink Handling : Please refer to general guidelines given in MSDS for handling ink for flexible Packaging.

MSDS : Material safety data sheets are available on request. We advise to read the MSDS carefully before using the products

Description:

Solvent Based Printing Ink Suitable for surface printing on Poly/HM/LD films and pouches.

Application:

Treated PP & PE, PVC, BOPP, PET Films

Key Product Features:

Excellent Printability and re solubility
High Colour Strength
For speed from 40 M/M to 120 M/M
Good Tape, Nail and Scuff Resistance.

Properties :

Ink Adhesion	5
Gloss	4
Water Resistance	2
Deep Freeze Resistance	NA
bond Resistance	4
Alkali Resistance	NA

Rating Scale :

1 = Lowest , 5 = Highest

Note : All resistance properties are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate. All resistance properties / LF are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate.

Remark :

Health & Safety : Read health and safety guidelines given in MSDS before using these products. The user is responsible for all local legislation requirement and packaging conditions.

Ink Handling : Please refer to general guidelines given in MSDS for handling ink for flexible Packaging.

MSDS : Material safety data sheets are available on request. We advise to read the MSDS carefully before using the products

Description:

Solvent Based Printing Ink for Printing on Shrink PVC.

Application:

Shrink PVC

Key Product Features:

Excellent Printability and re solubility
High Colour Strength
For speed from 40 M/M to 150 M/M
Good Tape, Nail and Scuff Resistance.

Properties :

Ink Adhesion	5
Gloss	4
Water Resistance	2
Deep Freeze Resistance	NA
bond Resistance	4
Alkali Resistance	NA

Rating Scale :

1 = Lowest , 5 = Highest

Note : All resistance properties are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate. All resistance properties / LF are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate.

Remark :

Health & Safety : Read health and safety guidelines given in MSDS before using these products. The user is responsible for all local legislation requirement and packaging conditions.

Ink Handling : Please refer to general guidelines given in MSDS for handling ink for flexible Packaging.

MSDS : Material safety data sheets are available on request. We advise to read the MSDS carefully before using the products

Description:

Solvent based Printing Ink Suitable for printing on Heat Resistance Pouches.

Application:

CC PET, BOPP, LDPE, Paper, Foil

Key Product Features:

Good Printability and re solubility
High Colour Strength
For speed from 50 M/M to 400 M/M
High bond strength

Properties :

Ink Adhesion	5
Rub Resistance	4
Heat resistance	200 – 220°C
Scratch Resistance	4
Gloss	4
Deep Freeze Resistance	4
Alkali Resistance	4
Water Resistance	4

Rating Scale :

1 = Lowest , 5 = Highest

Note : All resistance properties are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate. All resistance properties / LF are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate.

Diluent: (For Speed 350 M/M)

Slow - n Propanol/n-Propanol Acetate – 3 : 1

Normal – Ethyl Alcohol/Ethyl Acetate – 3 : 1

Fast – Ethyl Alcohol/Ethyl Acetate – 1 : 1

Retarder – Methoxy Propanol

Remark :

Health & Safety : Read health and safety guidelines given in MSDS before using these products. The user is responsible for all local legislation requirement and packaging conditions.

Ink Handling : Please refer to general guidelines given in MSDS for handling ink for flexible Packaging.

MSDS : Material safety data sheets are available on request. We advise to read the MSDS carefully before using the products

Description:

Solvent Based Printing Ink Suitable for reverse printing on treated BOPP films for Extrusion Lamination Purpose.

Application:

Treated BOPP

Key Product Features:

Good Printability and re solubility
High Colour Strength
For speed from 100 M/M to 250 M/M
High bond strength

Properties :

Ink Adhesion	5
Gloss	5
Deep Freeze Resistance	NA
Alkali Resistance	NA
Water Resistance	NA

Rating Scale :

1 = Lowest , 5 = Highest

Note : All resistance properties are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate. All resistance properties / LF are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate.

Diluent: (For Speed 350 M/M)

Slow - MIBK

Normal – TOL/EA – 1:1

Fast – MEK

Retarder – MIBK

Remark :

Health & Safety : Read health and safety guidelines given in MSDS before using these products. The user is responsible for all local legislation requirement and packaging conditions.

Ink Handling : Please refer to general guidelines given in MSDS for handling ink for flexible Packaging.

MSDS : Material safety data sheets are available on request. We advise to read the MSDS carefully before using the products

Description:

Dye/Pigment Based Heat Resistance Printing Ink Suitable for surface printing on Foil and Paper.

Application:

Aluminium Foil, Blister Foil & Paper

Key Product Features:

Good Printability and re solubility
High Colour Strength
For speed from 50 M/M to 250 M/M
High bond strength

Properties :

Ink Adhesion	5
Rub Resistance	5
Heat Resistance (Dwell Time 1 Sec. Pressure – 4ps)	200 - 220°C
Scratch Resistance	5
Gloss	5
Alkali Resistance	-
Water Resistance	5

Rating Scale :

1 = Lowest , 5 = Highest

Note : All resistance properties are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate. All resistance properties / LF are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate.

Remark :

Health & Safety : Read health and safety guidelines given in MSDS before using these products. The user is responsible for all local legislation requirement and packaging conditions.

Ink Handling : Please refer to general guidelines given in MSDS for handling ink for flexible Packaging.

MSDS : Material safety data sheets are available on request. We advise to read the MSDS carefully before using the products

Description:

Toluene/Ethyl Acetate Based Printing Ink Suitable for surface printing on Milk, Water, other Deep Freeze pouches, Shopping Bags and PP/HM Films.

Application:

Treated LDPE, Treated PP & PE, PVC, BOPP, PET Films

Key Product Features:

Excellent Printability and re solubility
High Colour Strength
Excellent Scuff, Nail and Rub Resistance (Dry and Wet)
For speed from 40 M/M to 240 M/M
Good Tape, Nail and Scuff Resistance

Properties :

Ink Adhesion	5
Gloss	5
Water Resistance	5
Heat Resistance	200 - 220°C
Deep Freeze Resistance	5
Scuff and Nail Resistance	5
Rub Resistance	5
Alkali Resistance	3

Rating Scale :

1 = Lowest , 5 = Highest

Note : All resistance properties are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate. All resistance properties / LF are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate.

Remark :

Health & Safety : Read health and safety guidelines given in MSDS before using these products. The user is responsible for all local legislation requirement and packaging conditions.

Ink Handling : Please refer to general guidelines given in MSDS for handling ink for flexible Packaging.

MSDS : Material safety data sheets are available on request. We advise to read the MSDS carefully before using the products

Flexographic

Sinosack

Sinoheat

Sinoaqua

Sinostar

Rotogravure

Rotolam NTNK

Rotolam PU

Rotolam

Sinoplus

Sinoshrink

Sinoflame

Sinolam

Sinophane

Sinofreeze