Sinosack
Description:
Solvent Based Printing Ink Suitable for printing on all Types of Woven Sacks
Application:
Polypropylene Woven Sack, Polypropylene Woven Fabric
Key Product Features:
- Good Printability and re solubility
- High Colour Strength
- Immediate adhesion on substrate
- Good Nail, Scuff and Tape Resistance
- High Gloss
Properties :
| Ink Adhesion | 5 |
| Nail and scuff Resistance | 4 |
| Gloss | 4 |
| Water Resistance | NA |
| Deep Freeze Resistance | NA |
| Tape Resistance | 5 |
| Alkali Resistance | 5 |
Rating Scale :
1 = Lowest , 5 = Highest
Note : All resistance properties are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate. All resistance properties / LF are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate.
Diluent: (For Speed 350 M/M)
Slow – Recommended Sinosack Thinner
Normal - Recommended Sinosack Thinner
Fast - Recommended Sinosack Thinner
Remark :
Health & Safety : Read health and safety guidelines given in MSDS before using these products. The user is responsible for all local legislation requirement and packaging conditions.
Ink Handling : Please refer to general guidelines given in MSDS for handling ink for flexible Packaging.
MSDS : Material safety data sheets are available on request. We advise to read the MSDS carefully before using the products
Sinoheat
Description:
Pigment Based Heat Resistance Printing Ink Suitable for surface printing on Block Bottom AD Star Cement Bags.
Application:
AD* Star Woven Sacks/Block Bottom Bags
Key Product Features:
- Good Printability and re solubility
- High Colour Strength
- For speed from 50 M/M to 220 M/M
- High bond strength
Properties :
| Ink Adhesion | 5 |
| Rub Resistance | 4 |
| Heat Resistance (Air Blow Temperature) | 800'C |
| Scratch Resistance | 4 |
| Gloss | 4 |
| Deep Freeze Resistance | - |
| Tape Resistance | 5 |
| Water Resistance | 5 |
Rating Scale :
1 = Lowest , 5 = Highest
Note : Heat Resistant against 800°C Hot air. no direct contact of substrate with Hot surface All resistance properties are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate. All resistance properties / LF are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate.
Remark :
Health & Safety : Read health and safety guidelines given in MSDS before using these products. The user is responsible for all local legislation requirement and packaging conditions.
Ink Handling : Please refer to general guidelines given in MSDS for handling ink for flexible Packaging.
MSDS : Material safety data sheets are available on request. We advise to read the MSDS carefully before using the products
Sinoaqua
Description:
Corrugated Boxes Coated and Uncoated, Kraft Paper
Application:
Polypropylene Woven Sack, Polypropylene Woven Fabric
Key Product Features:
- Good Printability
- High Colour Strength
- Rapid Drying
- High Opacity
- High Gloss
Properties :
| Ink Adhesion | 5 |
| Nail and scuff Resistance | 5 |
| Gloss | 4 |
| Water Resistance | 3 |
| Deep Freeze Resistance | NA |
| Tape Resistance | NA |
| Alkali Resistance | NA |
| Heat Resistance | NA |
Rating Scale :
1 = Lowest , 5 = Highest
Note : All resistance properties are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate. All resistance properties / LF are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate.
Remark :
Health & Safety : Read health and safety guidelines given in MSDS before using these products. The user is responsible for all local legislation requirement and packaging conditions.
Ink Handling : Please refer to general guidelines given in MSDS for handling ink for flexible Packaging.
MSDS : Material safety data sheets are available on request. We advise to read the MSDS carefully before using the products
Sinostar
Description:
Solvent Based Flexographic Printing Ink Suitable for HDPE/PP/LDPE and various types of shopping bags and food packaging substrates.
Application:
Treated PP & PE, PVC, BOPP, PET Films
Key Product Features:
- Good Printability
- High Colour Strength
- Rapid Drying
- High Opacity
- High Gloss
Properties :
| Ink Adhesion | 5 |
| Gloss | 5 |
| Water Resistance | 2 |
| Deep Freeze Resistance | NA |
| Bond Resistance | 5 |
| Alkali Resistance | NA |
Rating Scale :
1 = Lowest , 5 = Highest
Note : All resistance properties are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate. All resistance properties / LF are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate.
Remark :
Health & Safety : Read health and safety guidelines given in MSDS before using these products. The user is responsible for all local legislation requirement and packaging conditions.
Ink Handling : Please refer to general guidelines given in MSDS for handling ink for flexible Packaging.
MSDS : Material safety data sheets are available on request. We advise to read the MSDS carefully before using the products
Rotolam NTNK
Description:
Toluene and Ketone free lamination Grade Rotogravure Ink Suitable for Reverse Printing on flexible substrates
Application:
CC PET, CT PET, LD, PP, BOPP
Key Product Features:
- Toluene and Ketone Free Ink
- Good Printability and re solubility
- High Colour Strength
- For speed from 100 M/M to 350 M/M
- High bond strength
Properties :
| Ink Adhesion | 5 |
| Gloss | 5 |
| Bond Strength | >100gmf/15mm |
| Deep Freeze Resistance | NA |
| Alkali Resistance | NA |
| Water Resistance | NA |
Rating Scale :
1 = Lowest , 5 = Highest
Note : All resistance properties are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate. All resistance properties / LF are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate.
Diluent: (For Speed 350 M/M)
Normal - Ethyl Acetate – Ethanol – Methoxy Propanol – (45:45:10)
Slow – Methoxy Propanol
Remark :
Health & Safety : Read health and safety guidelines given in MSDS before using these products. The user is responsible for all local legislation requirement and packaging conditions.
Ink Handling : Please refer to general guidelines given in MSDS for handling ink for flexible Packaging.
MSDS : Material safety data sheets are available on request. We advise to read the MSDS carefully before using the products
Rotolam PU
Description:
PU Based Printing Ink Suitable for reverse printing on PET/Polyester films
Application:
Normal PET, CC PET, CT PET
Key Product Features:
- Good Printability and re solubility
- High Colour Strength
- For speed from 100 M/M to 450 M/M
- High bond strength
Properties :
| Ink Adhesion | 5 |
| Gloss | 5 |
| Soap Resistance | NA |
| Deep Freeze Resistance | NA |
| Alkali Resistance | NA |
| Water Resistance | NA |
Rating Scale :
1 = Lowest , 5 = Highest
Note : All resistance properties are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate. All resistance properties / LF are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate.
Diluent: (For Speed 350 M/M)
Slow - MIBK
Normal – TOL/EA – 1:1
Fast - MEK
Remark :
Health & Safety : Read health and safety guidelines given in MSDS before using these products. The user is responsible for all local legislation requirement and packaging conditions.
Ink Handling : Please refer to general guidelines given in MSDS for handling ink for flexible Packaging.
MSDS : Material safety data sheets are available on request. We advise to read the MSDS carefully before using the products
Rotolam
Description:
Vinyl Based Printing Ink Suitable for reverse printing on PET/Polyester films
Application:
Normal PET, CC PET, CT PET
Key Product Features:
- Good Printability and re solubility
- High Colour Strength
- For speed from 100 M/M to 350 M/M
- High bond strength
Properties :
| Ink Adhesion | 5 |
| Gloss | 5 |
| Soap Resistance | NA |
| Alkali Resistance | NA |
| Water Resistance | NA |
Rating Scale :
1 = Lowest , 5 = Highest
Note : All resistance properties are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate. All resistance properties / LF are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate.
Diluent: (For Speed 350 M/M)
Slow - MIBK
Normal – TOL/EA – 1:1
Fast – MEK
Remark :
Health & Safety : Read health and safety guidelines given in MSDS before using these products. The user is responsible for all local legislation requirement and packaging conditions.
Ink Handling : Please refer to general guidelines given in MSDS for handling ink for flexible Packaging.
MSDS : Material safety data sheets are available on request. We advise to read the MSDS carefully before using the products
Sinoplus
Description:
Solvent Based Printing Ink Suitable for surface printing on Poly/HM/LD films and pouches.
Application:
Treated PP & PE, PVC, BOPP, PET Films
Key Product Features:
- Excellent Printability and re solubility
- High Colour Strength
- For speed from 40 M/M to 120 M/M
- Good Tape, Nail and Scuff Resistance.
Properties :
| Ink Adhesion | 5 |
| Gloss | 4 |
| Water Resistance | 2 |
| Deep Freeze Resistance | NA |
| bond Resistance | 4 |
| Alkali Resistance | NA |
Rating Scale :
1 = Lowest , 5 = Highest
Note : All resistance properties are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate. All resistance properties / LF are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate.
Remark :
Health & Safety : Read health and safety guidelines given in MSDS before using these products. The user is responsible for all local legislation requirement and packaging conditions.
Ink Handling : Please refer to general guidelines given in MSDS for handling ink for flexible Packaging.
MSDS : Material safety data sheets are available on request. We advise to read the MSDS carefully before using the products
Sinoshrink
Description:
Solvent Based Printing Ink for Printing on Shrink PVC.
Application:
Shrink PVC
Key Product Features:
- Excellent Printability and re solubility
- High Colour Strength
- For speed from 40 M/M to 150 M/M
- Good Tape, Nail and Scuff Resistance.
Properties :
| Ink Adhesion | 5 |
| Gloss | 4 |
| Water Resistance | 2 |
| Deep Freeze Resistance | NA |
| bond Resistance | 4 |
| Alkali Resistance | NA |
Rating Scale :
1 = Lowest , 5 = Highest
Note : All resistance properties are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate. All resistance properties / LF are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate.
Remark :
Health & Safety : Read health and safety guidelines given in MSDS before using these products. The user is responsible for all local legislation requirement and packaging conditions.
Ink Handling : Please refer to general guidelines given in MSDS for handling ink for flexible Packaging.
MSDS : Material safety data sheets are available on request. We advise to read the MSDS carefully before using the products
Sinoflame
Description:
Solvent based Printing Ink Suitable for printing on Heat Resistance Pouches.
Application:
CC PET, BOPP, LDPE, Paper, Foil
Key Product Features:
- Good Printability and re solubility
- High Colour Strength
- For speed from 50 M/M to 400 M/M
- High bond strength
Properties :
| Ink Adhesion | 5 |
| Rub Resistance | 4 |
| Heat resistance | 200 – 220°C |
| Scratch Resistance | 4 |
| Gloss | 4 |
| Deep Freeze Resistance | 4 |
| Alkali Resistance | 4 |
| Water Resistance | 4 |
Rating Scale :
1 = Lowest , 5 = Highest
Note : All resistance properties are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate. All resistance properties / LF are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate.
Diluent: (For Speed 350 M/M)
Slow - n Propanol/n-Propanol Acetate – 3 : 1
Normal – Ethyl Alcohol/Ethyl Acetate – 3 : 1
Fast – Ethyl Alcohol/Ethyl Acetate – 1 : 1
Retarder – Methoxy Propanol
Remark :
Health & Safety : Read health and safety guidelines given in MSDS before using these products. The user is responsible for all local legislation requirement and packaging conditions.
Ink Handling : Please refer to general guidelines given in MSDS for handling ink for flexible Packaging.
MSDS : Material safety data sheets are available on request. We advise to read the MSDS carefully before using the products
Sinolam
Description:
Solvent Based Printing Ink Suitable for reverse printing on treated BOPP films for Extrusion Lamination Purpose.
Application:
Treated BOPP
Key Product Features:
- Good Printability and re solubility
- High Colour Strength
- For speed from 100 M/M to 250 M/M
- High bond strength
Properties :
| Ink Adhesion | 5 |
| Gloss | 5 |
| Deep Freeze Resistance | NA |
| Alkali Resistance | NA |
| Water Resistance | NA |
Rating Scale :
1 = Lowest , 5 = Highest
Note : All resistance properties are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate. All resistance properties / LF are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate.
Diluent: (For Speed 350 M/M)
Slow - MIBK
Normal – TOL/EA – 1:1
Fast – MEK
Retarder – MIBK
Remark :
Health & Safety : Read health and safety guidelines given in MSDS before using these products. The user is responsible for all local legislation requirement and packaging conditions.
Ink Handling : Please refer to general guidelines given in MSDS for handling ink for flexible Packaging.
MSDS : Material safety data sheets are available on request. We advise to read the MSDS carefully before using the products
Sinophane
Description:
Dye/Pigment Based Heat Resistance Printing Ink Suitable for surface printing on Foil and Paper.
Application:
Aluminium Foil, Blister Foil & Paper
Key Product Features:
- Good Printability and re solubility
- High Colour Strength
- For speed from 50 M/M to 250 M/M
- High bond strength
Properties :
| Ink Adhesion | 5 |
| Rub Resistance | 5 |
| Heat Resistance (Dwell Time 1 Sec. Pressure – 4ps) | 200 - 220°C |
| Scratch Resistance | 5 |
| Gloss | 5 |
| Alkali Resistance | - |
| Water Resistance | 5 |
Rating Scale :
1 = Lowest , 5 = Highest
Note : All resistance properties are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate. All resistance properties / LF are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate.
Remark :
Health & Safety : Read health and safety guidelines given in MSDS before using these products. The user is responsible for all local legislation requirement and packaging conditions.
Ink Handling : Please refer to general guidelines given in MSDS for handling ink for flexible Packaging.
MSDS : Material safety data sheets are available on request. We advise to read the MSDS carefully before using the products
Sinofreeze
Description:
Toluene/Ethyl Acetate Based Printing Ink Suitable for surface printing on Milk, Water, other Deep Freeze pouches, Shopping Bags and PP/HM Films.
Application:
Treated LDPE, Treated PP & PE, PVC, BOPP, PET Films
Key Product Features:
- Excellent Printability and re solubility
- High Colour Strength
- Excellent Scuff, Nail and Rub Resistance (Dry and Wet)
- For speed from 40 M/M to 240 M/M
- Good Tape, Nail and Scuff Resistance
Properties :
| Ink Adhesion | 5 |
| Gloss | 5 |
| Water Resistance | 5 |
| Heat Resistance | 200 - 220°C |
| Deep Freeze Resistance | 5 |
| Scuff and Nail Resistance | 5 |
| Rub Resistance | 5 |
| Alkali Resistance | 3 |
Rating Scale :
1 = Lowest , 5 = Highest
Note : All resistance properties are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate. All resistance properties / LF are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate.
Remark :
Health & Safety : Read health and safety guidelines given in MSDS before using these products. The user is responsible for all local legislation requirement and packaging conditions.
Ink Handling : Please refer to general guidelines given in MSDS for handling ink for flexible Packaging.
MSDS : Material safety data sheets are available on request. We advise to read the MSDS carefully before using the products